Ironwood-electronics GHz Socket assembly instruction using four set scr Manuel d'utilisateur télécharger pdf (Page 1)

Socket Base

Target PCB with SMT pads

Socket

Top Assembly

Set Screw (x4)

Compression plate

BGA Package

Angle wire elastomer

Socket Lid

Round head Screw

Dowel pin

Socket Base Assembly

Backing Plate

(not necessary for

some sockets)

Hex Nut

Nylon Washer

GHZ BGA Socket (direct mount - hardware)

Assembly Instructions

Tele: (800) 404-0204

www.ironwoodelectronics.com

1. Install the socket base assembly on the target PCB with the hardware (round head 0-80 screws and nuts) provided (see Detail A for

orientation).

2. Place BGA package (solder ball side down) into the socket. NOTE: BGA orientation on target PCB is critical.

3. Place the compession plate on top of the BGA package.

4. Install the socket top assembly on to the socket base assembly and swivel to lock into the position.

5. Turn the set screw (x4) clockwise, until it makes contact with the compression plate.

6. Turn an additional 3 to 5 turns.

Tooling holes have to be designed into the target PCB for this version of the GHz BGA socket

Filename: GCI.mcd, Rev A, 6/25/02, IP

Page 1 of 2

1 2

Résumé du contenu

Page 1 - Assembly Instructions

Socket BaseTarget PCB with SMT padsSocketTop AssemblySet Screw (x4)Compression plateBGA PackageAngle wire elastomerSocket LidRound head ScrewDowel pin

Page 2

OffsetDETAIL APATTERN OFFSET(CLOSER TO RIGHTSIDE TOOLING HOLES)NOTE: WHEN PLACING SOCKET BASE ASSEMBLY,ORIENTATION MARK SHOULD BE ON THE UPPER LEFT CO

Commentaires sur ces manuels

Pas de commentaire

Ironwood-electronics GHz Socket assembly instruction using four set scr Manuel d'utilisateur Page 1

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Ironwood-electronics GHz Socket assembly instruction using four set scr. Ironwood Electronics GHz Socket assembly instruction using four set screws User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Ironwood-electronics GHz Socket assembly instruction using four set scr Manuel d'utilisateur Page 1

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Ironwood-electronics GHz Socket assembly instruction using four set scr. Ironwood Electronics GHz Socket assembly instruction using four set screws User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Ironwood-electronics GHz Socket assembly instruction using four set scr