Ironwood-electronics GHZ BGA Socket (Surface Mount) Assembly Instructio Manuel d'utilisateur télécharger pdf

Socket

Top Assembly

Compression Screw

Compression plate

BGA Package

Z-Axis Elastomer

Socket Base Assembly

Machine Screw

Target PCB with SMT pads

Socket Lid

Alignment plate

GHZ BGA Socket (surface mount)

Assembly Instructions

Tele: (800) 404-0204

www.ironwoodelectronics.com

1. Reflow Socket Base assembly to the target PCB (see page 2 for reflow profile).

2. Place the square piece of elastomer provided into the socket base (rotation and 'side up' orientation are not critical).

Adjust the elastomer to sit into the alignment plate cavity.

4. Place BGA package (solder ball side down) into the socket. NOTE: BGA orientation on target PCB is critical.

5. Place the compession plate (if required*) on top of the BGA package.

6. Install the socket top assembly with the hardware provided (four 0-80 screws).

7. Turn the compression screw clockwise, until it makes contact with the compression plate or the BGA package.

8. Turn an additional quarter-turn.

*Ironwood Electronics technical staff will determine (from your package spec) if a compression or alignment plate is required

page 1 of 2

Filename: HSI.mcd, Rev A, 1/18/00, IP

1 2

Résumé du contenu

Page 1 - Assembly Instructions

SocketTop AssemblyCompression ScrewCompression plateBGA PackageZ-Axis ElastomerSocket Base AssemblyMachine ScrewTarget PCB with SMT padsSocket LidAlig

Page 2

Commentaires sur ces manuels

Pas de commentaire

Ironwood-electronics GHZ BGA Socket (Surface Mount) Assembly Instructio Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Ironwood-electronics GHZ BGA Socket (Surface Mount) Assembly Instructio. Ironwood Electronics GHZ BGA Socket (Surface Mount) Assembly Instructions User Manual [it] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Ironwood-electronics GHZ BGA Socket (Surface Mount) Assembly Instructio